C12

C12

NC12 BLACKASH

Concerta Series, 3-Way Center Channel Loudspeaker


Concerta Series, 3-Way Center Channel Loudspeaker

Find a Dealer

C12

Quite possibly the most important component of a multichannel surround sound speaker system, the center speaker provides most if not all of a movie’s spoken dialog, as well as music and sound effects, and is equally critical with multichannel surround mixes as well. The Concerta C12 center loudspeaker is designed to ensure that everything in the center channel is audible and consistent over a wide listening area, with exceptional dynamic range with no audible compression during high volume passages.

Equipped with a quartet of sophisticated drivers with Organic Ceramic Composite (OCC) diaphragms, the C12 features two 6½-inch die-cast frame woofers with high power handling and extended low frequency response all the way down to a remarkable 50Hz (-10dB).

The critical midrange frequencies are handled by a die-cast frame 4-inch driver that is housed within its own sub-enclosure, while the high frequencies are effortlessly reproduced by a 1-inch OCC dome tweeter with a neodymium magnet that is housed within the Constant Acoustic Impedance flared waveguide assembly for optimum dispersion, efficiency and dynamic range. All drivers are magnetically shielded for compatibility with CRT displays that can be affected by close-proximity magnetic fields.

The steep slope, high-order crossover is equipped with ultra-tight 3% tolerance components to ensure outstanding consistency and smooth tonal balance over the entire frequency range. The C12 cabinet is constructed of thick MDF with substantial internal bracing for added rigidity, and is equipped with a rear-mounted adjustable tilt system that is ideal for above-the-monitor placement.

An optional stand is available for floor placement, which positions the C12 at the desired height with a slight upward tilt for optimum coverage over the listening area. The C12 is available in your choice of cherry or black cabinet finishes.

  • Highlights & Specs

C12 Highlights


General Specifications

Frequency Response In-room response ±1.5dB from 85Hz to 15kHz Low-frequency extension –10dB @ 50Hz Bandwidth –6dB @ 60Hz and 45kHz
Height 9.1" (23.1 cm)
Width 20.9" (53.1 cm)
Depth 10.1" (25.7 cm)
Weight Shipping weight 32 lb (14.5 kg)
Crossover Frequencies 3-Way, high-order @ 500Hz and 2.8kHz
Finishes Black ash (Cherry discontinued as of Oct-2012)
High Frequency Driver Components 1" (2.5 cm) micro-ceramic composite (MCC) cone tweeter
Nominal Impedance 6 ohms
Low Frequency Driver Components Two 6 ½" (16.5 cm) micro-ceramic composite (MCC) cone woofers
Mid-frequency Driver Components 4" (10 cm) micro-ceramic composite (MCC) cone midrange
Recommended Amplifier Power 20 – 175 Watts
Sensitivity 90dB SPL, with 2.83V @ 1m (4 pi anechoic)
Optional Accessories Optional Floor Pedestal for C12 • Adds 12.1" (30.7 cm) to C12 height • Textured black painted finish

Audio Specifications

Frequency Response In-room response ±1.5dB from 85Hz to 15kHz Low-frequency extension –10dB @ 50Hz Bandwidth –6dB @ 60Hz and 45kHz
Height 9.1" (23.1 cm)
Width 20.9" (53.1 cm)
Depth 10.1" (25.7 cm)
Weight Shipping weight 32 lb (14.5 kg)
Crossover Frequencies 3-Way, high-order @ 500Hz and 2.8kHz
Finishes Black ash (Cherry discontinued as of Oct-2012)
High Frequency Driver Components 1" (2.5 cm) micro-ceramic composite (MCC) cone tweeter
Nominal Impedance 6 ohms
Low Frequency Driver Components Two 6 ½" (16.5 cm) micro-ceramic composite (MCC) cone woofers
Mid-frequency Driver Components 4" (10 cm) micro-ceramic composite (MCC) cone midrange
Recommended Amplifier Power 20 – 175 Watts
Sensitivity 90dB SPL, with 2.83V @ 1m (4 pi anechoic)
Optional Accessories Optional Floor Pedestal for C12 • Adds 12.1" (30.7 cm) to C12 height • Textured black painted finish

View all Center Channel

Not finding what you're looking for?

View all Center Channel