C25 - White - 2-way Dual 5.25" Center Channel Loudspeaker - Hero C25 - White - 2-way Dual 5.25" Center Channel Loudspeaker - Front C25 - White - 2-way Dual 5.25" Center Channel Loudspeaker - Back C25 - White - 2-way Dual 5.25" Center Channel Loudspeaker - Detailshot 1 C25 - White - 2-way Dual 5.25" Center Channel Loudspeaker - Detailshot 2

C25

C25WHAM

2-way Dual 5.25" Center Channel Loudspeaker


The Concerta2 C25 center channel loudspeaker was designed to deliver outstanding accuracy over a remarkably wide frequency range. The 2-way 5.25” center channel loudspeaker has the ability to provide performance worthy of the most demanding entertainment systems.

Find a Dealer

C25

The C25 is a true full range 2-way 5.25” center channel loudspeaker that was designed to be the true acoustical anchor for the entire system. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 5.25” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

  • Highlights & Specs
  • Documents & Downloads

C25 Highlights

  • Derived from Revel’s award-winning Performa3 Series Loudspeakers
  • 5.25"deep anodized aluminum cone woofers
  • 1" Aluminum Tweeter
  • Fourth generation Acoustic Lens waveguides
  • Computer optimized driver positioning and network integration
  • No visible fasteners on the front, top or side panels
  • Magnetic grilles with brushed metallic logos
  • High-gloss Black and High-gloss White painted finishes

General Specifications

Crossover Frequencies 2.1kHz
Enclosure Type Sealed
High-frequency Driver Components 1" Aluminum Tweeter with Acoustic Lens Waveguide
Nominal Impedance 6 Ohms
Input Connections Five-way binding posts
Low Frequency Extension 80Hz, 68Hz, 48Hz (-3 dB, -6 dB, -10 dB)
Low-frequency Driver Components 2 x 5.25" Aluminum Cone Woofer
Recommended Amplifier Power 40-120W
Sensitivity 89dB (2.83V @ 1M)
Dimensions 7.25" x 19.45"x 10.1" (18cm x 49cm x 27cm)—Including Feet
Weight 20 lbs

Documents & Downloads