Rhythm2 - Black - Powered Subwoofer - Hero Rhythm2 - Black - Powered Subwoofer - Back Rhythm2 - Black - Powered Subwoofer - Left

Rhythm2

RHYTHM2 BLK

Powered Subwoofer


The Ultima Rhythm2 sets a new standard for powered subwoofers at any price. With a dual voice coil, 18-inch woofer and dual ultra high-power amplifiers, the Rhythm2 can play real-world program material at astonishingly high levels with very low distortion.

Find a Dealer

Rhythm2

The Revel Ultima Rhythm2 subwoofer is truly the ultimate subwoofer, designed on a cost-no-object basis that establishes a new standard of low frequency reproduction. Revel engineers created a state of-the-art 18-inch transducer using the most sophisticated FEA modeling in the design of every component part, from the ultra-low distortion motor system to the spider, surround, voice coil and frame. Advanced Klippel® analysis was used to optimize the massive 4-inch diameter by 1.75-inch long dual voice coils, immersed in a symmetrical magnetic field stabilized to maintain low distortion, even during very long excursion.

Two 1,000 Watt RMS (2,000 Watt peak) amplifiers power the massive dual voice coils to provide ample power for the huge diaphragm area and long-excursion capability. This massive output power assures output greater than 115dB, at low-distortion.

The Rhythm2 offers sophisticated DSP room correction capabilities commensurate with its cutting-edge capabilities. Ultra high-resolution equalization precisely corrects low frequency coloration caused by room modes. Unlike most subwoofer equalization systems, the Rhythm2 subwoofer EQ takes the contribution of the high-pass (main) speaker’s contribution at low frequencies. Without such a capability, subwoofer EQ is of no real value. The Revel Ultima Rhythm2 takes the latest findings from Revel’s research scientists fully into account, providing genuine sonic improvements compared to other subwoofers.

The Rhythm2 offers a full electronic crossover with unequaled flexibility for choosing independent crossover frequency and slope for the subwoofer and the main outputs, and even provides room correction for the main loudspeakers. Since room modes dominate sound quality below around 300 Hz, room correction for the main speakers dramatically improves sound quality.

With true delay adjustments provided for the subwoofer, the Rhythm2 can be better integrated with the main loudspeakers than other subwoofers, offering a unique freedom from coloration for the entire combination.

  • Highlights & Specs
  • Documents & Downloads

Rhythm2 Highlights

  • Standard-setting output capability and low distortion
  • Massive 18-inch woofer with dual 4-inch x 1.75-inch
  • Ultra low-distortion motor system with symmetrical magnetic fields and mirror-image spider design to cancel distortion; no servo feedback system required
  • Two ultrahigh-power amplifiers with a total of 2,000W RMS and 4,000W peak outputforlow dynamic compression at very high output levels
  • Sophisticated self-protection circuitry allows unprecedented dynamics for extraordinarily lifelike bass

General Specifications

Height 24.6" (625mm)
Width 27.9" (709mm)
Depth 28.1" (714mm)
Weight 196 lb (89 kg)
Features High-resolution DSP room EQ; Fully configurable electronic crossover; High-pass room EQ; PC setup via USB
Amplifier Power 2,000WRMS / 4,000W peak power
Driver Components 18-inch cast-frame woofer; 4-inch-diameter voice coil; 1.7-inch Xmax
Maximum Acoustic Output Over 115dB acoustic output

Audio Specifications

Height 24.6" (625mm)
Width 27.9" (709mm)
Depth 28.1" (714mm)
Weight 196 lb (89 kg)
Features High-resolution DSP room EQ; Fully configurable electronic crossover; High-pass room EQ; PC setup via USB
Amplifier Power 2,000WRMS / 4,000W peak power
Driver Components 18-inch cast-frame woofer; 4-inch-diameter voice coil; 1.7-inch Xmax
Maximum Acoustic Output Over 115dB acoustic output

View all Legacy Product Support

View all Legacy Product Support

Not finding what you're looking for?

View all Legacy Product Support