C12

The Concerta C12 center loudspeaker is designed to ensure that everything in the center channel is audible and consistent over a wide listening area, with exceptional dynamic range and no compression at high volume.

Read More View Product Page

C12

Quite possibly the most important component of a multichannel surround sound speaker system, the center speaker provides most if not all of a movie’s spoken dialog, as well as music and sound effects, and is equally critical with multichannel surround mixes as well. The Concerta C12 center loudspeaker is designed to ensure that everything in the center channel is audible and consistent over a wide listening area, with exceptional dynamic range with no audible compression during high volume passages.
Equipped with a quartet of sophisticated drivers with Organic Ceramic Composite (OCC) diaphragms, the C12 features two 6½-inch die-cast frame woofers with high power handling and extended low frequency response all the way down to a remarkable 50Hz (-10dB). The critical midrange frequencies are handled by a die-cast frame 4-inch driver that is housed within its own sub-enclosure, while the high frequencies are effortlessly reproduced by a 1-inch OCC dome tweeter with a neodymium magnet that is housed within the Constant Acoustic Impedance flared waveguide assembly for optimum dispersion, efficiency and dynamic range. All drivers are magnetically shielded for compatibility with CRT displays that can be affected by close-proximity magnetic fields.
The steep slope, high-order crossover is equipped with ultra-tight 3% tolerance components to ensure outstanding consistency and smooth tonal balance over the entire frequency range. The C12 cabinet is constructed of thick MDF with substantial internal bracing for added rigidity, and is equipped with a rear-mounted adjustable tilt system that is ideal for above-the-monitor placement.
An optional stand is available for floor placement, which positions the C12 at the desired height with a slight upward tilt for optimum coverage over the listening area. The C12 is available in your choice of cherry or black cabinet finishes.


Highlights

Dual 6-1/2" deep-anodized cone woofers

4" Deep-anodized cone midrange

1" Anodized Al-dome tweeter

CAI waveguide

Steep-slope, high-order crossover

Heavily braced MDF enclosure

Specifications

Print Specifications

Description

Concerta Series, 3-Way Center Channel Loudspeaker

High-frequency Driver Components

1" (2.5 cm) micro-ceramic composite (MCC) cone tweeter

Mid-frequency Driver Components

4" (10 cm) micro-ceramic composite (MCC) cone midrange

Low-frequency Driver Components

Two 6 ½" (16.5 cm) micro-ceramic composite (MCC) cone woofers

Frequency Response

In-room response: ±1.5dB from 85Hz to 15kHz Low-frequency extension: –10dB @ 50Hz Bandwidth: –6dB @ 60Hz and 45kHz

Recommended Amplifier Power

20 – 175 Watts

Crossover Frequencies

3-Way, high-order @ 500Hz and 2.8kHz

Nominal Impedance

6 ohms

Sensitivity

90dB SPL, with 2.83V @ 1m (4 pi anechoic)

Finishes

Black ash (Cherry discontinued as of Oct-2012)

Height

9.1" (23.1 cm)

Width

20.9" (53.1 cm)

Depth

10.1" (25.7 cm)

Weight

Shipping weight: 32 lb (14.5 kg)

Optional Accessories

Optional Floor Pedestal for C12 • Adds 12.1" (30.7 cm) to C12 height • Textured black painted finish