C208 C208 C208 C208 C208

C208

C208 BK

3-way Center Channel Loudspeaker


3-way Center Channel Loudspeaker

Find a Dealer

C208

Revel C208 low-frequency transducers and midrange transducer feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers. Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers.

The C208 tweeter has been created around a newly-designed motor and dome assembly that sets a new standard of transparency for the Performa3 category. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the midrange transducer in the crossover region. This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The C208 are housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures feature sleek curved tops and bottoms, which are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced coloration. These beautiful, modern enclosures are finished in high-gloss piano black, or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

To learn more about the C208 center channel loudspeakers, please read the Owner's Manual located in the downloads section.

  • Highlight & Specs
  • Manuals & Downloads

C208 Highlights

  • Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
  • Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
  • New waveguides provide consistent sound over a wide listening area
  • Enclosures created by Italian luxury cabinetmakers
  • Fluid-model port designs keep distortion low
  • Advanced crossovers optimize timbre accuracy both on axis and throughout the room

General Specifications

Height 11.8" (30 cm) Note
Width 28.9" (73.5 cm)
Depth 13.8" (35 cm)
Weight 52 lb (23 kg) Note
Crossover Frequencies 375 Hz, 2450 kHz
Enclosure Type Sealed
Finishes Piano Black or High Gloss Walnut
High-frequency Driver Components 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Nominal Impedance 8 Ohms
Input Connections Dual Sets of Binding Posts
Low Frequency Extension -10dB@34Hz -6dB@41Hz -3dB@50Hz
Low-frequency Driver Components Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers
Mid-frequency Driver Components 4" (10 cm) Aluminum Cone, Cast-frame Midrange
Recommended Amplifier Power 50-350
Sensitivity 89dB

Audio Specifications

Height 11.8" (30 cm) Note
Width 28.9" (73.5 cm)
Depth 13.8" (35 cm)
Weight 52 lb (23 kg) Note
Crossover Frequencies 375 Hz, 2450 kHz
Enclosure Type Sealed
Finishes Piano Black or High Gloss Walnut
High-frequency Driver Components 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Nominal Impedance 8 Ohms
Input Connections Dual Sets of Binding Posts
Low Frequency Extension -10dB@34Hz -6dB@41Hz -3dB@50Hz
Low-frequency Driver Components Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers
Mid-frequency Driver Components 4" (10 cm) Aluminum Cone, Cast-frame Midrange
Recommended Amplifier Power 50-350
Sensitivity 89dB

View all Performa3

Not finding what you're looking for?

View all Performa3